Filter
Top Products
Performance Verification
P5205 Instruction Manual
29
Vise
Pliers
Modified BNC adapter
Plastic cover removed
Figure 12: Removing plastic covers from binding posts
Setup
WARNING. These procedures require the application of high voltage
to the inputs of the P5205 probe. B ecause this adapter has exposed
metal surface, only qualified personnel should perform te sting with
voltage levels that exceed 30 V rms. All pertinent safety rules and
guidelines for elevate d voltage measurements should be followed and
adhered to.
Connect the output of the probe to the Channel 3 i nput of the test
oscilloscope. Let the probe warm up for 20 minutes.