Filter
Top Products
Maintena nce
P5205 Instruction Manual
23
Removing and Replacing the TEKPROBE Interface Collar
To remove the TEKPROBE interface collar, firmly grasp the
compensat ion box body with one hand, and the TEKPROBE
interface collar with the other hand. Firmly pull the interface collar
off.
To replace the colla r, note the pin configuration on the compensation
box and their holes in the interface collar. The group of three pins fit
through the smaller of the two holes in the interface collar. See
Figure 8.
Align the tab to the slot and gently press the two pieces together. See
Figure 8.
Once installed, the TEKPROBE collar should rotate freely to lock
and unlock.
Tab
Slot
Figure 8: Replacing the TEKPROBE collar