Filter
Top Products
39
930486 Rev.A
38
930486 Rev.A
X. OPERATING GUIDE
2. To Program Your Chair:
a. Turn off power to the chair.
b. Insert QTRONIX Programmer plug (A)
into the charger/programmer socket
(B) on the front of the joystick.
c. Turn on power to the chair; program
as needed.
d. Remove plug and cycle ON/OFF
switch to drive chair.
Note: Review the QTRONIX Programmer
Owner’s Manual for more details on how to
program your chair.
Note: Program settings that are not matched
for the capabilities of the rider can result in
serious injury. Do not alter settings without the
advice of your health care professional.
C. THERMAL ROLL-BACK
Your chair has a thermal roll back circuit.
This protects the controller from damage
due to overheating. In extreme conditions
(such as repetitive hill climbing) the circuit
will decrease the power to your motors.
This allows the chair to operate at a
reduced speed.When the controller cools,
the chair will return to normal speed.
D. CIRCUIT BREAKERS
1. Notes:
Your Quickie S-525 has a battery box with
a circuit breaker.
• In the unlikely event of a short circuit
or heavy overload, all power to your
chair will be shut off.
• To reset your chair, depress the circuit
breaker button (B) is on the front
right side of the battery box. A few
minutes wait is required before the
circuit breaker will reset.
2. Repeated Shutdown:
If the chair continues to shut down
after resetting, have it serviced by
a supplier.
B
A
X. OPERATING GUIDE
A. PERFORMANCE CONTROL SETTINGS
1. It is vital to match performance control settings to your level of function and
ability.
2. Consult your health care professional and your supplier to select the best
control settings for you.
3. Check and adjust the settings every six to twelve months (or more often, if needed).
4. Adjust the control settings immediately if you notice any change in
your ability to:
• Control the joystick.
• Hold your torso erect.
• Avoid running into objects.
5. Control Settings are adjusted through the use of the QTRONIX Programmer.
See your supplier if you do not own a QTRONIX Programmer.
B. QTRONIX PROGRAMMING PAD (OPTIONAL)
Program settings beyond the ability of the rider can result in serious injury. Consult
your health care advisor before you alter settings.
1. Notes:
The QTRONIX Programmer lets
you adjust the performance
control settings of the S-525.
You can customize a program
for yourself or select the stan-
dard program.
• acceleration rate
• deceleration rate
• turn acceleration
• turn deceleration
• forward speed (max & min)
• reverse speed (max & min)
• turn speed (max & min)
• steer correct
With a remote system
you can also adjust:
• 4-axis joystick throw
• sleep timer
• read timer
A
B