Filter
Top Products
English
13
• Do not use electrically conductive or antistatic air tubings.
• Do not use the air tubing if there are any visible signs of damage.
• Only ResMed air tubing and accessories should be used with the device. A different type of air
tubing or accessory may alter the pressure you actually receive, reducing the effectiveness of the
treatment.
• Only use the ResMed 90W or 30W power supply unit. Use the 90W power supply unit to power
the system comprising the device, H5i, air tubing, DC/DC converter and battery pack. The 30W
power supply unit is designed to power the device only and recommended for traveling.
• Only ResMed products are designed to be connected to the module connector port. Connecting
other devices could damage the device.
• Blocking the air tubing and/or air inlet of the device while in operation could lead to overheating of
the device.
CAUTIONS
• Do not open the device enclosure. There are no user serviceable parts inside. Repairs and servicing
should only be performed by an authorised ResMed service agent.
• Do not use bleach, chlorine, alcohol, or aromatic-based solutions, moisturising or antibacterial soaps
or scented oils to clean the device, humidifier or air tubing. These solutions may cause damage and
reduce the life of these products.
• Incorrect system setup may result in incorrect mask pressure reading. Ensure the system is
correctly set up.
• Be careful not to place the device where it can be bumped or where someone is likely to trip over
the power cord.
• Make sure the area around the device is dry and clean and clear of bedding, clothes or other objects
that could block the air inlet or cover the power supply unit.
• Ensure that the device is protected against water if used outdoors. Enclose the device in the S9
travel bag for transport.