ResMed AutoSet CS Sleep Apnea Machine User Manual


 
English
8
Operating temperature +5ºC to +35ºC
Note: The air flow for breathing produced by this therapy
device can be higher than the temperature of the room.
Under extreme ambient temperature conditions (40ºC) the
device remains safe.
Operating humidity 10–95% non-condensing
Operating altitude Sea level to 2,591 m
Storage and transport temperature -20ºC to +60ºC
Storage and transport humidity 10–95% non-condensing
Housing construction Flame retardant engineering thermoplastic
Supplemental oxygen Recommended maximum supplemental oxygen flow:
4 L/min (VAuto or ASV mode); 15 L/min (S, ST or T mode)
Hypoallergenic air filter Non-woven acrylic and polypropylene fibers with
polypropylene carrier
Standard air filter Polyester fiber
SlimLine
TM
air tubing Flexible plastic, 1.8 m, 15 mm inner diameter
Standard air tubing Flexible plastic, 2 m, 19 mm inner diameter
ClimateLine heated air tubing Flexible plastic and electrical components, 2 m, 15 mm
inner diameter
ClimateLine
MAX
heated air tubing Flexible plastic and electrical components, 1.9 m, 19 mm
inner diameter
Air outlet The 22 mm conical air outlet complies with ISO 5356-1
Electromagnetic compatibility Product complies with all applicable electromagnetic
compatibility requirements (EMC) according to
IEC60601-1-2, for residential, commercial, and light industry
environments.
It is recommended that mobile communication devices are
kept at least 1 m away from the device.
Information regarding the electromagnetic emissions and
immunity of these ResMed devices can be found on
www.resmed.com, on the Products page under Service
and Support. Click on the PDF file for your language.