ResMed AutoSet CS Sleep Apnea Machine User Manual


 
English
9
Notes:
The manufacturer reserves the right to change these specifications without notice.
The temperature and relative humidity settings displayed for Climate Control are not measured
values.
Check with your clinician/service provider before using the SlimLine or ClimateLine air tubing with
devices other than the S9 or H5i.
Pneumatic flow path
Symbols
The following symbols may appear on your S9, power supply unit, air tubing or packaging.
Caution; Read instructions before use; Protection against insertion of fingers and
against vertically dripping water; Not drip proof; Type BF equipment; Class II
equipment; Start/Stop; Manufacturer; European RoHS; Batch Code;
Catalogue number; Serial number; Direct current; Lock/unlock;
Remove tub to fill; China pollution control logo 1; China pollution
control logo 2; European Authorised Representative; Keep Dry;
Aircraft use Medical-Portable Electronic Devices (M-PED) that meet the
Federal Aviation Administration (FAA) requirements of
RTCA/DO-160 can be used during all phases of air travel
without further testing or approval by the airline operator.
ResMed confirms that the S9 meets RTCA/DO-160
requirements.
IEC 60601-1 classification Class II (double insulation), Type BF
S9 H5i
Blower
Mask
Tube
Inlet filter
IP21
IP20