Filter
Top Products
28 www.pridemobility.com Stylus
APPENDIX I - SPECIFICATIONS
STYLUS SPECIFICATIONS
Seat Dimensions:
16 in. x 16 in., 16 in. x 18 in., 18 in x 16 in., 18 in. x 18 in., 20 in. x 16 in., 20 in. x 18 in.
Back Height: 15-17 in., 17-19 in.
Seat Upholstery: Adjustable tension
Seat-to-Floor Height See figure 14.
Caster Wheels: 5 in. (12.70 cm), 6 in. (15.24 cm), or 8 in. (20.32 cm)
Axle Mount: 3-position
Caster Fork: 4-position axle; short fork
Maximum Safe Slope: 5° (8.7%)
Turning Radius:
1
See figure 29.
Overall Size:
1
Length: See figure 29.
Width: See figure 29.
Weight Capacity: 250 lbs. (113.4 kg)
Component Weight: Base: 33.5 lbs. (15 kg) without front riggings
Armrests: Flip-back, desk-length; Height-adjustable, desk or full length
Front Riggings: Swing-away footrests, Elevating leg rests
Wheel Locks: Push-to-lock, adjustable; Pull-to-lock
Frame Finish: Silver Vein
Accessories: Anti-tip wheels; oxygen tank holder; wheel lock extension
Static Stability Forward (Wheels Locked)
26°
Static Stability Rearward (Wheels Locked)
17° (without oxygen tank and holder); 10.7° (with oxygen tank and holder)
Wheel Lock Operational Force
2
Left: 60N Right: 60N
1
Due to manufacturing tolerances and continued product improvement, this specification can be subject to a variance of (+ or – ) 3%.
2
Test results for Stylus equipped with push-to-lock wheel locks in accordance with ANSI-RESNA WC Vol. 2 Section 03. Maximum
operating force for hand operated wheel locks is 60N (+ or – ) 10%. Operational force can vary based on tire type, manufacture, and
condition.
NOTE: This product conforms to all applicable ANSI-RESNA testing requirements and ISO 7176 series
EN12183 standards. All specifications subject to change without notice.