Filter
Top Products
18 www.pridemobility.com Stylus
IV. COMFORT ADJUSTMENTS
Swing-Away Footrest (SFR) Removal
The Swing-away Footrests (SFR) can be moved or
removed to aid in transfers or transporting your wheel-
chair.
To move the SFR to the side:
1. Push the release lever back. See figure 15.
2. Move the SFR aside.
3. Repeat for the other side if necessary.
To remove the SFR:
1. Move the SFR to the side.
2. Pull the SFR up.
3. Repeat for the other side if necessary.
Swing-Away Footrest (SFR) Length
You can change the SFR length between 12-16 in.
(30.48-40.64 cm) in 1-in. (2.54-cm) increments. This
length is measured from the SFR foot plate to the top
of the SFR. See figure 16.
To change the SFR length:
1. Remove the screw from the SFR.
2. Adjust the SFR to the desired length.
3. Reinstall the screw into the SFR.
4. Repeat for the other side.
Elevating Leg Rest (ELR) Length
You can change the ELR length between 15-19 in.
(38.1-48.26 cm). This length is measured from the ELR
foot plate to the top of the ELR. See figure 17.
To change the ELR length:
1. Loosen the bolt head on the underside of the ELR.
NOTE: You may need to tap the bolt head to release
the wedge clamp.
2. Adjust the ELR to the desired length.
3. Tighten the bolt head.
4. Repeat the procedure for the other side.
Figure 16. SFR Length Adjustment
Figure 15. SFR Release
Figure 17. ELR Length Adjustment
BOLT HEAD
RELEASE
LEVER
SCREW