Filter
Top Products
20 www.pridemobility.com Stylus
IV. COMFORT ADJUSTMENTS
Seatback Angle Adjustment (Optional)
Your wheelchair may be equipped with angle adjustable
back canes that allow you to adjust the seatback to one of
five different angles. The angle adjustment range is 85°-
105° in 5° increments. See figure 21.
To adjust the seatback angle:
1. Remove the top screw and nut from the back cane
and loosen the lower screw. See figure 21.
2.
Rotate the eccentric washer to the appropriate position
that represents the desired angle.
See figure 21.
3. Reinstall the hardware to its original position from
step 1.
Flip-back Armrests
The armrests can be flipped up to aid in transfers or
transporting your wheelchair.
To flip up the armrest:
1. Squeeze the armrest latch to release the armrest. See
figure 22.
2. Flip the armest back.
3. Repeat for the other side if necessary.
Armrest Height Adjustment
You can adjust the armrest height 7 in. (17.78 cm) in 1-
in. (2.54-cm) increments.
To adjust the armrest height:
1. Pull back and hold the release pin located on the
armrest. See figure 23.
2. Move the armrest up or down to the desired position.
3. Release the pin.
4. Make sure the armrest locks into place.
5. Repeat for the other side if necessary.
Figure 22. Flip-back Armrests
ARMREST
LATCH
Figure 23. Armrest Height Adjustment
RELEASE PIN
Figure 21. Seatback Angle Adjustment
SCREW
NUT
ECCENTRIC
WASHER