Pride Mobility 1122 Wheelchair User Manual


 
Jazzy 1122 www.pridemobility.com 25
Elevating Leg Rests (Optional)
Elevating Leg Rests (ELRs) offer an infinite range of ad-
justment between 0º – 70º for the leg angle and a leg
rest adjustment range of 15 – 20 in.
To adjust the ELR angle:
1. Push down release lever B. See figure 20.
2. Move the leg rest to the desired angle.
To rotate the ELR:
1. Push in release lever A. See figure 20.
2. Rotate the ELRs.
To adjust the ELR length:
1. Remove the two screws from the side of each leg
rest extension. See figure 20.
2. Slide the leg rest in or out to the desired length.
3. Reinstall the two screws on each leg rest extension.
Power Elevating Seat (Optional)
Your power chair may be equipped with a power el-
evating seat actuator. See figure 11. The power elevat-
ing seat is equipped with a speed inhibit system that re-
duces power chair speed by one-half whenever the seat
is elevated more than 1-2 inches. Always check to be
sure the speed inhibit system is operating properly be-
fore using your power chair, and do not move around in
your seat to any great extent when the seat is in the raised
position.
The power elevating seat can enhance the capabilities of
the power chair in several ways:
! By elevating the seat, your level of reach is extended
to allow more freedom and independence in many
environments.
! You can easily adjust the seat height to any surface
to which you want to transfer. The seat swivels 90
degrees to whichever side the joystick is located.
! By raising your seat, you are closer to the eye level of
standing persons. This provides better interaction.
For all the benefits the power elevating seat can pro-
vide you, there are limitations.
V. COMFORT ADJUSTMENTS
Figure 20. Elevating Leg Rests
ADJUSTMENT
SCREWS
LEG REST
EXTENSION
RELEASE LEVER B
RELEASE LEVER A
Figure 21. Power Seat Switch
POWER SEAT
SWITCH