Pelco Manual C1487M-D (7/99) 49
MONOCHROME (Spectra II™ Only)
Signal Format EIA (model DD5AM)
CCIR (model DD5AM-X)
Scanning System: 2:1 interlace
Image Sensor 1/4-inch interline transfer CCD
Horizontal Resolution: >500 TV lines
Effective Pixels
EIA: 768 (H) x 494 (V)
CCIR: 752 (H) x 582 (V)
Lens:
Minimum f-stop: F1.4
Focal Length: 4 mm to 64 mm optical
Zoom Ratio: 16X optical zoom, 8X electronic zoom
Horizontal
Angle of View 47° (at 4 mm wide zoom), 3° (at 64 mm telephoto zoom)
MTBF: >2 million cycles at room temperature (zoom, focus, iris)
Focus: Automatic with manual override
Sensitivity
EIA: .1 lux at f1.4, AGC gain 26.5 dB, signal level 40 IRE, without IR
cut filter
CCIR: .1 lux at f1.4, AGC gain 29.5 dB, signal level 300 mV, without
IR cut filter
Signal Process: DSP-3R
Sync System: AC line lock, phase adjustable via remote control*
Shutter Speed: Automatic (electronic iris)/manual
EIA: 1/60-1/30,000
CCIR: 1/50-1/30,000
Iris Control: Automatic with manual override*
Gain Control: Automatic with manual override*
Video Output
EIA: .714V ± .07V (100 IRE ± 10 IRE)
CCIR: .7V ± .07V
Signal to Noise Ratio: >46 dB
* Manual control of camera setup functions can be done with CM6700, CM8500, CM9500,
CM9760 and MPT9500 controllers, but not with CM7500, MPT9000 or KBD9000
controllers.
(Design and product specifications subject to change without notice.)