Filter
Top Products
40 Pelco Manual C1487M-D (7/99)
AUTO FLIP
There are two auto flip modes: on or off.
When the auto flip mode is on, the auto flip feature is enabled. When it is off, the feature is
disabled.
To change the auto flip mode:
1. Program preset 95 (28 if in 32-preset mode; refer to the
Preset Functions
section) to
access the main menu (refer to the
Main Menu Access
section). The main menu will
appear.
2. If the cursor (>) is not beside Other, move the joystick up or down to position the
cursor beside Other.
3. Press the Iris Open button to enter the Other submenu.
4. Move the joystick up or down to position the cursor beside Auto Flip.
5. Press the Iris Open button. A star will appear beside Auto Flip and the cursor will move
to the right beside the word On or Off.
6. Move the joystick up or down to toggle between On and Off.
7. SELECT - Press the Iris Open button on your keyboard to select your choice.
CANCEL - Press the Iris Close button if you do not want to change the setting.
PROPORTIONAL PAN
(This section applies to Spectra II™ only.)
There are two proportional pan modes: on or off.
When proportional pan mode is on, the proportional pan feature is enabled and the pan
(and tilt) speed will depend on the amount of zoom. At telephoto zoom settings, the pan
(and tilt) speeds will be slower for a given amount of joystick deflection than at wide zoom
settings. This keeps the image from moving too fast on the monitor when there is a large
amount of zoom. This slowing does not happen when going to a preset, but does occur in
turbo mode when high zoom is selected.
When the proportional pan mode is off, the feature is disabled and the pan speed will not
depend on the amount of zoom.
To change the proportional pan mode:
1. Program preset 95 (28 if in 32-preset mode; refer to the
Preset Functions
section) to
access the main menu (refer to the
Main Menu Access
section). The main menu will
appear.
2. If the cursor (>) is not beside Other, move the joystick up or down to position the
cursor beside Other.
3. Press the Iris Open button to enter the Other submenu.
4. Move the joystick up or down to position the cursor beside Proportional Pan.
5. Press the Iris Open button. A star will appear beside Proportional Pan and the cursor
will move to the right beside the word On or Off.
6. Move the joystick up or down to toggle between On and Off.
7. SELECT - Press the Iris Open button on your keyboard to select your choice.
CANCEL - Press the Iris Close button if you do not want to change the setting.