Filter
Top Products
PATENTS PENDING
50
11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713
OUTBOARD ROLLSTOP TIME ADJUSTMENT (IF REQUIRED)
SETUP
CONTROLLER:
ENTERING SETUP
FIG. 50-3
NOTE: Call MAXON Technical Service
before doing this adjustment.
1. Turn power switch OFF
(FIG. 50-2).
HAND PENDANT:
ENTERING SETUP
FIG. 50-1
POWER
SWITCH
TURNING POWER SWITCH ON/OFF
(LH PUMP SHOWN)
FIG. 50-2
CONTROLLER
(REF)
2. Enter SETUP by holding
both the UP and FOLD
switches on the hand
pendant (FIG. 50-1) and
turning the power switch
ON at the same time (FIG.
50-2). Controller will
read SETUP (FIG. 50-3).
NOTE: The power switch on the Lift
must be turned OFF before
entering SETUP.
UP
FOLD