Lifescan OneTouch Ultra Blood Glucose Meter User Manual


 
Your OneTouch
®
Ultra
®
Meter stores the 150 most recent blood
glucose and control solution test results with date and time in its
memory. It also provides you with 14- and 30-day averages of
your blood glucose test results. Review the test results in
memory with these easy steps.
34
You may enter the memory mode either
with the meter turned off or immediately
after completing a test. Press the M button.
˘ and the 14-day average will appear
with the number of blood glucose tests
performed in this period. After three
seconds, the 30-day average will appear.
(If you are using the meter for the first
time,
Q indicates there are no test
results in memory.)
These averages are calculated from the
blood glucose results obtained during the
last 14 and 30 calendar days. A S result
will be included in your averages as 33.3
mmol/L (600 mg/dL) and a T result as
1.1 mmol/L (20 mg/dL). Results marked as
control solution tests will not be included
in your averages.
Enter the Memory Mode.
STEP 1
USING THE METER MEMORY
DCO_06052203A_OTU_OB_CAN_EN 2/20/04 1:39 PM Page 34