Filter
Top Products
19
To ensure an accurate result:
• Shake the vial well
• Discard the first drop
• Wipe the dispenser tip
Hold the drop to the narrow channel in the
top edge of the test strip. When the
confirmation window is full, the meter will
begin to count down from N to A second.
Compare the control solution test result
with the range printed on the test strip
vial. The result should fall within this
range.
Result Appears in 5 Seconds.
STEP 3
Apply Control Solution.
STEP 2
NOTE: Mark all control solution tests with
Ë
to distinguish
them from blood glucose tests in the meter memory. Marked
control solution tests will not be included in your averages.
DCO_06052203A_OTU_OB_CAN_EN 2/20/04 1:39 PM Page 19