Filter
Top Products
22
Assembly
Stereo-fluorescence module
UV-light excluder ➜ side-faced column
Always position the UV-light excluder so that the user
never looks directly at the light spot (page 5).
▶ Using the clamping screw,
secure the clamp on
the side- faced column,
beneath the focusing drive.
▶ Slacken the central fixing
screw.
▶ Unfold the arm.
▶ Tighten the central fixing
screw.
▶ Secure the arm, com-
plete with connector, to
the clamp, on the left or
right. Tighten the clamping
screw.
▶ Secure the UV-light
excluder to the arm.
Tighten the clamping
screw.
Filterholder ➜ fluorescence module
The dichromatic beam splitter and the barrier filter are built into
the fluorescence module in accordance with the configuration
(see table, page 19).
The excitation filter is supplied in a separate filterholder.
A filterholder with diaphragm is also supplied. This diaphragm
can be slid into the illumination beam path if the object should
not be illuminated.
The filter slide on the fluorescence module has space
for three filterholders:
• withexcitationfilter(holder1)
• withdiaphragm(holder3)
• withindividually-selectablefilter,e.g.neutralfilter
(holder 2).
Double-iris diaphragm
The double-iris diaphragm is used to increase the depth of field
(see user manual M2-105-0EN). Also, the stray reflections arising
in the left-hand beam path can be minimized with the help of
the double-iris diaphragm.
TheHUvideo-/phototubealreadyincludesadouble-iris
diaphragm.
Additional assembly instructions
Lamp housing pages 12 –13
Supply units page 14
Adjusting the mercury-vapour lamp page 15
1
2
3