Filter
Top Products
11
Leica MZ10 F
Focusing drive ➜ base of stand
▶ Connect manually-operated or motor-driven focusing drive,
complete with column, to base, as described in user manual
M2-105-0EN.
Before using the motor focus, you must read the safety
directions in the accompanying user manual M2-267-
104.
Microscope carrier ➜ focusing drive
▶ Fit microscope carrier of Leica MZ10 F to focusing drive in
accordance with user manual M2-105-0EN.
Optics carrier ➜ microscope carrier
The Leica MZ10 F optics carrier and the FLUOIII filter
system form a single unit which was factory-adjusted. Do not
try to dismantle it.
▶ Fit the Leica MZ10 F optics carrier to the microscope
carrier in accordance with the user manual M2-105-0EN.
Additional components
▶ Fit the remaining components, such as binocular tube, eyepi-
eces and optional double-iris diaphragm, to the FLUOIII filter
system in accordance with user manual M2-105-0EN.
Video-/phototube
To permit shorter exposure times in fluorescence photography,
werecommendyoutousethevideo-/phototubeHDVwith100%
light in the video-/photo beam path.
Double-iris diaphragm
The double-iris diaphragm is used to increase the depth of field
(see user manual M2-105-0EN).
▶ Fit the double-iris diaphragm to the FLUOIII filter system.
UV protection screen ➜ microscope carrier
▶ Using a hollow screw, fit the UV protection screen to the
microscope carrier on either the left or the right.
Always position the UV protection screen so that
the user can never look directly at the light spot
(see page 4):
▶ Fit the UV protection screen
with arm, at the side.
▶ Release the hollow screw.
▶ Adjust the UV protection
screen, upwards
or downwards.
▶ Tighten the hollow screw.