SECTION 10—BATTERIES
TDX
®
SI, TDX SI-HD 58 Part No 1154294
5. Slidethebatterytrayintothewheelchair(FIGURE 10.3).
6. Installthebatterydoorandrearshroud.RefertoInstallingtheFrontShroud/Battery
RetentionBracketandRearShroudonpage 58.
FIGURE 10.4 Installing Batteries into Wheelchair
Installing the Front Shroud/Battery Retention Bracket and Rear Shroud
ƽ WARNING
Wheelchairs with TRRO or TRBKTS Only - Battery retention brackets MUST be
installed at all times. Otherwise, the wheelchair will not be WC/19 compliant.
After installing front shroud, ensure that the mounting screws on the front shroud/
battery retention bracket are fully engaged into the battery box.
NOTE:Forthisprocedure,refertoFIGURE 10.2onpage 56.
1. Reinstallthefrontshroud/batteryretentionbracketontofrontofwheelchairframe.
2. Installtwomountingscrewsonthesidesofthefrontshroud/batteryretentionbracket.
ƽ WARNING
When installing batteries, ensure battery connector is securely engaged to the
controller connector - otherwise serious personal injury may result.
3. Wheelchairswi thFootboardsOnly:Usingthemountingscrewandwasher,securethe
footboardsupporttothewheelchairframe.
4. Connectthecontrollertothebatteriesattherearofthewheelchair.
DETAIL “A”
DETAIL “B”
DETAIL “C”
Battery with Battery
Connector Bracket
Front of the Battery Tray
Rear of the Battery Tray
Battery Stop
Connect Front
Battery to
Rear Battery
HERE
Rear Battery
Front
Battery
Battery
Straps
NOTE:22NFBatteries
shown.