Filter
Top Products
SECTION 8—FOOTBOARD ASSEMBLY
TDX
®
SI, TDX SI-HD 48 Part No 1154294
SECTION 8—FOOTBOARD
ASSEMBLY
ƽ WARNING
After ANY adjustments, repair or service and before use, make sure that all
attaching hardware is tightened securely - otherwise injury or damage may result.
Before performing any maintenance, adjustment or service, verify that ON/OFF
switch on the joystick is in the OFF position.
DO NOT stand on the flip-up footboard. When getting in or out of the wheelchair,
make sure that the flip-up footboard is in the upward position.
LIMITED CLEARANCE BETWEEN FOOTBOARD AND CASTER - The user’s feet
MUST remain on the footboard while operating the wheelchair. If the user’s feet
are allowed to rest off the side of the footboard they may come in contact with the
caster possibly resulting in injury.
Removing/Installing the Footboard
NOTE:Forthisprocedure,refertoFIGURE 8.1onpage49.
Removing
1. Removethesocketheatscrew,threewashers,spacerandlocknutthatsecuresthe
footboardtothefootboardsupport.
2. Removethefootboardfromthefootboardsupport.
Installing
ƽ WARNING
Pinch point may occur when rotating the footboard assembly.
1. P ositionthefootboardontothefootboardsupportsothatthe mountingholesinthe
wheelchairframe alignwiththedesiredmountingholesinthefootboardsupport.
2. Usingthesocketheatscrew,threewashers,spacerandlocknutsecurethefootboard
tothefootboardsupport.