Invacare TDX SI Mobility Aid User Manual


 
SECTION 5—WHEELCHAIR OPERATION
Part No 1154294 33 TDX
®
SI, TDX SI-HD
SECTION 5—WHEELCHAIR
OPERATION
ƽ WARNING
After ANY adjustments, repair or service and before use, make sure that all
attaching hardware is tightened securely - otherwise injury or damage may result.
Set-up of the Electronic Control Unit is to be performed only by a qualified techni-
cian. The final adjustments of the controller may affect other activities of the wheel-
chair. Damage to the equipment could occur under these circumstances.
Operating the Wheelchair
Turning the Power On/Off
NOTE:Forthisprocedure,refertoFIGURE 5.1.
1. ToturnthepowerOn,performoneofthefollowingsteps:
2. TurningthepowerOffcanbeachievedbyperformingoneofthefollowingsteps:
FIGURE 5.1 Turning the Power On/Off
Using the Joystick to Drive the Wheelchair
NOTE:Forthisprocedure,refertoFIGURE 5.2onpage 34.
Thejoystickislocatedonthejoystickhousingandprovidessmoothcontrolofspeedand
direction.Itisequippedwith360degreesofmobilityforeaseofoperation.Thejoystickis
springloaded,andautomaticallyreturnstotheupright(neutral)positionwhen
released.
Pushingthejoystickinagivendirectioncausesthewheelchairtomoveinthatdirection.
JOYSTICK ACTION
MPJ+ Move the On/Off switch Forward to the On position.
SPJ+ Press the On/Off button.
JOYSTICK ACTION
MPJ+ Move the On/Off switch Back to the Off position.
SPJ+ Press the On/Off button.
MPJ+ Joystick
On/Off
Switch
SPJ+ Joysticks
On/Off
Button