Support User Manuals

Invacare Pronto M91 Base Mobility Aid User Manual

Open as PDF

of 76

SECTION 9—BATTERIES

Pronto® M91™Base with SureStep® 66 Part No 1143153

RequiredItems:

1. Attachthebatterychargerconnectortothechargerportonthejoystick.

2. Plugthecharger’sACpowercord,orextension,intothegrounded120VACwall

outlet.

3. Waituntilchargingiscomplete.

NOTE:Alloweighthoursfornormalcharging.Largerbatteries(greaterthan55ampere‐hours)or

severelydischargedbatteriesmayrequireuptosixteenhourstobeproperlychargedandequalized.

NOTE:Itisadvantageoustorechargefrequentlyratherthanonlywhennecessary.Infact,a

battery’slifeisextendedifthechargelevelismaintainedwellabovealowcondition.

NOTE:Ifthebatteriesneedtobechargedmoreoftenortakelongertochargethannormal,they

mayneedtobereplaced.ContactanInvacaredealerforservice.

FIGURE 9.7 Charging Batteries

TOOL QUANTITY COMMENTS

Battery Charger 1 Supplied

Extension Cord 1 Not Supplied

MPJ JoystickSPJ Joysticks

Charger/

Programming

Port

Charger/Programming Port (On

Front of Joystick)

previous next