Support User Manuals

Invacare Pronto M91 Base Mobility Aid User Manual

Open as PDF

of 76

SECTION 5—WHEELCHAIR OPERATION

Pronto® M91™Base with SureStep® 44 Part No 1143153

6. Ifnecessary,performthefollowingtorepositiontheadjustmentlock:

A. Slidetheadjustmentlockfromthemountingbracket.

B. Rotateadjustmentlock180°andslideadjustmentlockovertheoppositeendofthe

mountingbracket.

7. Slidejoystickmountingtubethroughthemountingbrackettothedesiredposition

andsecureadjustmentlocktotubebyturningleveronadjustmentlock.

FIGURE 5.11 Repositioning the Joystick - Van Seat

Disconnecting/Connecting the Joysticks

NOTE:Forthisprocedure,refertoFIGURE 5.12.

NOTE:Thejoystickconnectorislocatedattherearoftheseatframe.

SPJ+ Joysticks

Disconnecting

1. HoldthelightGREYcollarportionofthejoystickconnectorwithonehandandthe

controllerconnectoronthewheelchairintheotheranddisconnectthembypulling

themapart.

Connecting

ƽ WARNING

The joystick connector and controller connector fit together in one way only. DO

NOT force them together.

1. HoldthelightGREYcollarportionof

thejoystickconnectorwithonehand

andthecontrollerconnectoronthe

wheelchairintheotherandalignthem.

2. Lightlypushtoengagethejoystick

connectorandthecontrollerconnector.

FIGURE 5.12 Disconnecting/Connecting

the Joysticks - SPJ+ Joysticks

Hex Mounting Screws

Locknuts

Adjustment Lock Lever

Joystick Mounting

Tube

Mounting

Bracket

Spacers

Arm Frame

NOTE:MK5SPJ‐80joystick

shown,allotherjoysticks

repositioninthesameway.

Joystick

Connector

Light Grey Collar

Controller

Connector

previous next