Support User Manuals

Invacare Pronto M91 Base Mobility Aid User Manual

Open as PDF

of 76

SECTION 9—BATTERIES

Part No 1143153 61 Pronto® M91™Base with SureStep®

7. Repositionbatteryterminalcoversoverbatterypost(s).

8. Usingnewtie‐wraps,securetheterminalcoverstothebatteryterminalsasshownin

FIGURE 9.3.

9. RepeatSTEPS1‐8toinstallandconnecttherearbatterytotherearbatteryharness.

FIGURE 9.3 Connecting/Disconnecting the Battery Wiring Harness

Disconnecting

NOTE:Forthisprocedure,refertoFIGURE 9.3onpage61.

1. Removetheexistingtie‐wrapsthatsecurethebatteryterminalcoverstothebattery

terminals.

2. PeelbackREDbatteryterminalcovertoexposeREDbatterycableconnectionto

batteryterminal.

3. PeelbackBLACKbatteryterminalcoverfromBLACKbatterycableonfrontbattery

orGREYbatteryterminalcoverfromBLACKbatterycableonrearbattery.

4. RemovethemountingscrewsandnutsthatsecurethePOSITIVE(+)REDbatterycable

tothePOSITIVE(+)batteryterminal/postasshowninFIGURE 9.3.

5. RemovethemountingscrewsandnutsthatsecuretheNEGATIVE(‐)BLACKbattery

cabletotheNEGATIVE(‐)batteryterminal/postasshowninFIGURE 9.3.

6. Setwiringharnessaside.

7. RepeatSTEPS1‐6todisconnecttherearbatteryfromtherearbatteryharness.

NEGATIVE (-)

Battery Cable

Tie-Wrap

NEGATIVE (-)

Battery Terminal

Nut

Mounting

Screw

POSITIVE (+)

Battery Cable,

Mounting Screw with

Fuse Hardware

Battery

POSITIVE (+)

Battery Terminal

Locknut

Tie-Wrap

previous next