Filter
Top Products
SECTION 8—WHEELS
Compass™SPT™ 60 Part No 1122134
Replacing Wheel Handrim
NOTE: For this procedure, refer to FIGURE 8.5.
1. Remove the wheel from the wheelchair. Refer to Installing/Removing Rear Wheels on
page 58.
2. Remove the button screws that secure the existing handrim to the wheel.
3. Remove the existing handrim.
4. Install the new handrim by reversing STEPS 2-3.
ƽ WARNING
Make sure detent pin and locking pins of the quick-release axles are fully released
BEFORE operating the wheelchair.
5. Reinstall wheel to the wheelchair. Refer to Installing/Removing Rear Wheels on
page 58.
6. Repeat STEPS 1-5 for the opposite wheel if necessary.
FIGURE 8.5 Replacing Wheel Handrim
Replacing/Repairing Wheel Tire/Tube
ƽ WARNING
Replacement of wheel tire or tube MUST be performed by a qualified technician.
Handrim
Button Screw