Filter
Top Products
SECTION 4—FRONT RIGGINGS
Compass™SPT™ 36 Part No 1122134
Removing
1. Push the legrest release handle inward while rotating the elevating legrest outward.
2. Lift the legrest assembly out of the mounting tube of the wheelchair frame.
3. Repeat STEPS 1-2 for opposite side, if necessary.
FIGURE 4.9 Replacing Sector Block
Raising/Lowering the Elevating Legrest
NOTE: For this procedure, refer to FIGURE 4.10.
1. Perform one of the following:
• Raising: Lift legrest assembly up to desired height.
• Lowering: Lift elevating legrest assembly up with one hand. While supporting the
elevating legrest assembly (and user’s leg), pull release lever up with other hand
and lower legrest assembly to desired height.
FIGURE 4.10 Raising/Lowering the Elevating Legrest
Release Handle
NOTE: The mounting tube will be part of the seat frame or wheelchair front frame
depending on wheelchair model.
Mounting Pin
Mounting Tube
Elevating Legrest
Inside of Wheelchair
Release Lever
Elevating Legrest Assembly