Filter
Top Products
SECTION 3—SAFETY INSPECTION/TROUBLESHOOTING
Lightweight, Standard and Heavy Duty Wheelchairs 28 Part No. 1114811
Inspect/Adjust Periodically
❑ Ensure that the wheelchair rolls straight (no excessive drag or pull to one side).
❑ Inspect for loose/missing/broken hardware in all locations.
❑ Inspect frame and crossbraces for loose or missing hardware.
❑ Inspect for bent frame or crossbraces.
❑ Check that wheel locks are easy to engage.
❑ Inspect seat and backs for rips and sagging.
❑ Check that there is no excessive side movement or binding in the rear wheels when
lifted and spun.
❑ Inspect rear wheels for cracks and wear (hub and rim).
❑ Inspect rear wheels for cracked, bent or broken spokes.
❑ Inspect handrims for signs of rough edges or peeling.
❑ Adjust front casters/forks bearing system if wheel wobbles noticeably or binds to a
stop.
❑ Ensure wheel bearings are clean and free of moisture.
❑ Inspect casters for cracks and wear (hub and rim).
❑ Ensure that casters are free of debris.
❑ Clean upholstery and armrests.
❑ Check front riggings for rough/sharp edges and wear.
❑ Check that all labels are present and legible. Replace if necessary.
Troubleshooting
Chair
Veers
Right/
Left
Chair 3
Wheels
Sluggish Turn or
Performance
Casters
Flutter
Squeaks
and
Rattles
Looseness
in
Chair
Solutions
XX X X
If pneumatic, check
tires for correct and
equal pressure
XXXXX
Check for loose stem
nuts and bolts.