Filter
Top Products
Part No. 1110545 23 A-4
SECTION 3UPHOLSTERY
UPHOLSTERY
Phillips
Screws
NOTE: Wheelchair frame not shown for clarity.
Seat Upholstery
Seat Frame
FIGURE 4 - SEAT UPHOLSTERY REPLACEMENT
SEAT UPHOLSTERY REPLACEMENT (FIGURE 4)
1. Remove the seat cushion from the wheelchair.
2. Remove the phillips screws that secure the existing seat upholstery to the seat
frame.
WHEELCHAIR DEPTH NUMBER OF SCREWS
14 to 15-inches 10
16 to 17-inches 12
18-inches 14
19 to 20-inches 16
22-inches 18
3. Remove the existing seat upholstery.
4. Install the NEW seat upholstery by reversing the above steps.
5. Reinstall the seat cushion onto the wheelchair.
4. Secure adjustable tension back upholstery to the back canes with the mounting screws. Torque
to 20-25 in./lbs.
NOTE: Clean the upholstery with warm water and mild detergent to remove superficial soil.
WARNING
After the adjustable tension back upholstery has been positioned to the end-
user's individual needs, the fastening straps MUST be securely fastened
BEFORE applying the back upholstery cover. The adjustable tension back
should be checked whenever entering the wheelchair to ensure that the
fastening/adjuster straps are securely fastened.