Filter
Top Products
Part No. 1110545 17 A-4
SECTION 2SAFETY INSPECTION
SAFETY INSPECTION
SAFETY INSPECTION CHECKLIST
NOTE: Every six (6) months or as necessary, take your wheelchair to a qualified technician for a
thorough inspection and servicing. Regular cleaning will reveal loose or worn parts and enhance the
smooth operation of your wheelchair. To operate properly and safely, your wheelchair must be cared for
just like any other vehicle. Routine maintenance will extend the life and efficiency of your wheelchair.
Section 2 - Safety Inspection includes the following:
Safety Inspection Checklist Troubleshooting Maintenance
Initial adjustments should be made to suit your personal body structure needs and
preference. Thereafter follow these maintenance procedures:
ITEM Initially Weekly Monthly Periodically
GENERAL
Wheelchair rolls straight (no excessive drag or pull to one side). X X
Inspect for loose/missing/broken hardware in all locations. X X
WHEEL LOCKS
Do not interfere with tires when rolling. X X
Pivot points free of wear and looseness. X X
Wheel locks easy to engage. X X
Wheel locks prevent wheelchair from moving when engaged. X X
SEAT AND BACK
Inspect upholstery for rips or sagging. X X
Inspect for loose or broken hardware. X X
Inspect fastening flaps to ensure they securely latch. X X
REAR WHEELS
Quick/Quad-release axles lock properly.
Lubricate if necessary (with Teflon® lubricant ONLY). X X
No excessive side movement or binding when lifted and spun. X X
Inspect for cracked, worn, bent or broken spokes. X X
Ensure all spokes are uniformly tight. X X
Inspect wheels for cracks and wear (hubs and rims). X X
HANDRIMS
Inspect for signs of rough edges or peeling. X X
FRONT CASTERS/FORKS
Inspect wheel/fork assembly for proper tension by
spinning caster; caster should come to a gradual stop. X X
Adjust bearing system if wheel wobbles noticeably or binds to
a stop. Ensure wheel bearings are clean and free of moisture. X X
Check headtube locknuts for tightness. X X
Inspect casters for cracks and wear (hubs and rims). X X
Inspect for cracked, worn or broken spokes. X X
CAUTION: As with any vehicle, the wheels and
tires should be checked periodically for cracks and
wear, and should be replaced if damaged.
TIRES
Inspect for flat spots, cracks and wear. X X
If pneumatic tires check for proper inflation. X X
CAUTION: As with any vehicle, the wheels and
tires should be checked periodically for cracks and
wear, and should be replaced if damaged.
CAMBER/AXLE TUBE
Axle tube is securely tightened. X X
Camber inserts are not extended more than 3-inches. X X
CLEANING
Clean upholstery and armrests. X X
Clean optional quick release levers. X X