Invacare 9000XT RECLINER Mobility Aid User Manual


 
9000 Series 44 Part No. 1056953
Section 9 - Recliner includes the following:
Recliner Operation
Replacing the Headrest Pillow
Replacing Headrest/Back Upholstery
Adjusting Headrest/Back Upholstery Tension
Adjusting the Seat Depth
Adjusting the Seat Width
Storing/Replacing the Spreader Bar
Installing the Anti-Tippers
Removing/Installing the Rear Wheels
Using/Adjusting the Wheel Locks
Installing the Telescoping I.V. Rod
WARNING
After ANY adjustments, repair or service and BEFORE use, make sure all attach-
ing hardware is tightened securely - otherwise injury or damage may occur.
RECLINER OPERATION (FIGURE 1)
WARNING
ALWAYS make sure that the wheelchair is stable BEFORE using the
recliner option.
ALWAYS wear your Seat Positioning Strap. Inasmuch as the SEAT PO-
SITIONING STRAP is an option on this wheelchair (You may order with
or without the Seat Positioning Strap), Invacare strongly recommends
ordering the Seat Positioning Strap as an additional safeguard for the
wheelchair user.
Ensure the spreader bar is attached and secured before using the 9000XT
Recliner.
LIFT KIT MODELS ONLY - Both spring lift mechanisms MUST be opera-
tional BEFORE using the recliner. DO NOT operate the recliner option if
only one (1) of the spring lift mechanisms is operational.
TO HEALTHCARE PROFESSIONALS/ASSISTANTS:
Make sure occupant's hands and body are clear of all pinch points before
reclining back. Pinch Points exist between spreader bar and reliner
mechanism. Use caution, otherwise injury may occur.
When returning the occupant of the wheelchair to the full upright posi-
tion, more body strength will be required for approximately the last
twenty (20) degrees of incline (reverse recline). Make sure to use proper
body mechanics (use your legs) or seek assistance if necessary to avoid
injury.
R
E
C
L
I
N
E
R
RECLINERSECTION 9
RECLINER