Filter
Top Products
Do's And Don'ts
SOME DO'S
1. Do install after the pressure tank on well water installations.
2. Do comply with all local building, plumbing and electrical codes.
3.
Do install pressure-reducing valve if inlet pressure exceeds 90 psi.
4.
Do install gravity drain on cabinets.
5. Do secure drain line on appliance and at drain outlet.
SOME DON'TS
1. Do not install if checklist items are not satisfactory.
2.
Do not install if incoming or outlet piping water temperature exceeds
120° Fahrenheit (49° C) . Please see specifications on page 13.
3.
Do not allow soldering torch heat to be transferred to valve components or plastic parts.
4. Do not overtighten plastic fittings.
5.
Do not place appliance right up against a wall which would deny access to plumbing.
6.
Do not install the appliance backwards. Follow arrows on inlet/outlet.
7. Do not plug the transformer into an outlet that is activated by an on/off switch.
8. Do not connect the drain and the overflow (gravity drain) together.
NOTES: