Filter
Top Products
WaterMax Filters
61 AAN
61 AAE
-BWO
61 AAR
-BWO
61 AAS
-BWO
61 AAF
-BWO
10,000
N/A N/A N/A
N/A
5
N/A N/A N/A N/A
20
N/A
N/A N/A
N/A
7
N/A
N/A
5
'
N/A
Manganese
Greensand
Activated Carbon
Filter Ag
Calcite/Corsex
multi-Grade
1.25
1
1.25 1.25
1
6 6 6 6 6
10 10
10
10 12
7
5 5
7 7
.5
N/A N/A N/A N/A
30-120 30-120
30-120
30-120 30-120
1 1 1
1
1
5
7
7 7
7
45 0 0 0 0
3
0 0
0
0
3
0 0
0
0
4 oz.
KMnO4
N/A
N/A
N/A N/A
16.7 GPM 21.4 GPM 21.5 GPM 20.4 GPM
19.4 GPM
10.5 GPM
15.9 GPM 15.9 GPM 15.2 GPM 15.1 GPM
4.5 GPM @
4.7 PSI
3.6 GPM @
1.1 PSI
4.5 GPM @
1.5 PSI
4.5 GPM @
1.8 PSI
3.6 GPM @
1.5 PSI
Removes iron
Removes
Removes Will
raise the Removes
and iron
algae.
tastes, odors
suspended pH of most low
suspended
Also removes
and will reduce
matter
pH water. The
matter
up to 5 ppm
most man-
(turbidity) from mineral media
(turbidity) from
Hydrogen
made
water down to
must be
water down to
Sulfide with
pollutants.
the 20-40
replenished nominal 20
the presence
Backwash
micron range.
periodically to
microns.
of 2 ppm iron.
every 3 days
Backwash
maintain
Backwash
Regenerate
or
as
needed.
every 3 days optimum bed
every 3
days
every 6 days
or
as
needed.
depth for or as needed.
for iron; as
WARNING!
effective
needed for
Must not
Must not be
backwash ed
correction.
Hydrogen
Backwash
Sulfide
for 24 hours
every 2 days to
(sulfur),
after
prevent
installation.
solidification of
1
The 61AAS-BWO will raise the pH of most, but not all low pH water. Some water requires
chemical injection using a chemical feed pump.
2
CAUTION: follow the instructions on the KMnO4 container.
3
For optimum water quality, do not exceed recommended service flow rate for filter media type.
WaterMax Filters
Application Chart
Capacity (ppm)
Sulphur H
2
S
(2 ppm)
Iron (ppm)
Minimum pH
Media type
Media amount (cu. ft.)
Cont. flow rate (gpm)
Peak flow rate (gpm)
Backwash rate (gpm)
Brine line flow control (gpm)
Water pressure
Mode settings
Backwash #1 (min)
Brine/rinse (min)
Backwash #2 (min)
Salt (lbs.
3 b. a It setting
=
4oz. KMnO4
2
Regenerant used
Flow rate at 25 PSI drop
Flow rate at 15 PSI drop
Recommended service flow
3
@
pressure drop
16