Filter
Top Products
28
After entering the Function Mode:
1 Press 3.
The display will show either "F3 0" or "F3 1".
If "F3 0" is displayed, the Dotson-Davis Equation will be used.
If "F3 1" is displayed, the Dotson-Davis Equation will be omitted from the Body Fat Estimation Program.
a) To Change Between Equations:
Press either 0 or 1 and the display will show the change. Press ENTER if this is the correct change.
b) To Exit the Function Mode, turn the unit OFF.
F4 - Color Printer Selection
After entering the Function Mode:
a) Press 4
If "0" is displayed, the unit is set to print using the Color Forms.
If "1" is displayed, unit is set to print Fitness Analysis on plain paper.
b) To change, press "0" or "1". Press ENTER to save the change.
c) To Exit the Function Mode, turn the unit OFF.
F8 - Data Stream
This function allows the FUTREX-5000XL measured data to be sent to an external PC computer.
! If F8 is "0", no data is being sent.
! If f8 is "1", all measured data will be sent to the external computer.
F5 and F7 are not used, but they must be set to "0" or the instrument will not function properly. F6 is not used, but must be
set to "1" or the instrument will not function properly.