Filter
Top Products
16
! Press ENTER.
The display will then show a decimal point following the number "1". The number "2" will then be
d
i
s
p
l
a
yed.
!Remove the Light Wand and replace it on the same site on the body. Press ENTER. The display will show a
decimal point following the number "2".
6) The Relative Body Fat Estimation is Displayed.
! Aim the silver stripe of the Light Wand vertically toward the upper portion of the body.
! Keep the body site to be estimated relaxed (do not permit subject to flex muscle area being
estimated).
! Use the Light Shield to block the external light. ALWAYS avoid estimations under strong
lights (e.g. direct sunlight) because errors may occur.
CAUTION: Do not move the Light Wand while the decimal point is illuminated. The
actual estimation is being made at that time.