Filter
Top Products
Battery Installation
H
IMPORTANT! Use only a Power Wheels
®
12 volt 12Ah
battery. Use of any other battery will damage your scooter.
Make sure that you charge the battery for at least 18 hours
using the enclosed Power Wheels
®
12 volt charger before
operating your scooter for the first time. Charge the battery
for at least 14 hours after each use of the scooter. Never
charge the battery longer than 30 hours. Failure to follow
these instructions may damage your battery and will void
your warranty.
For best performance, use only a Power Wheels
®
12 volt
12 Ah battery (part number: 00801-1048). Please contact
your local Power Wheels
®
Authorized Service Center for a
replacement battery. To find the authorized service center
nearest you, see page 24.
• While pressing the release button on the scooter floor, lift
the footboard from the scooter.
• Plug the motor harness connector into the battery socket.
Push firmly to make sure the motor harness
connector is completely inserted into the battery.
• Fit the battery into the battery compartment, as shown.
• At an angle, insert the front tab on the footboard into the
slot in the scooter floor.
• Push down on the footboard to “snap” it into place.
13
1
3
2
Footboard
Motor Harness
Connector
12 Volt
Battery
Press
Release
Button