Filter
Top Products
Adjusting the Brakes
11
• Locate the brake compartment.
• Turn the lock nut counter-clockwise a few turns to
loosen it.
• Turn the brake adjustment knob counter-clockwise a few
turns to close the gap.
• Again, examine the brake handle to be sure there is
no gap between the brake base and the brake handle.
Re-tighten the brake adjustment knob if still needed.
• After you are satisfied that you have properly closed the
gap between the brake base and the break handle, hold
the brake adjustment knob in position and turn the lock
nut clockwise until it stops against the metal bracket.
• Replace the brake compartment cover and the screws.
Tighten the screws with a Phillips screwdriver. Do not
over-tighten.
6
• Turn the scooter so that the side is upright.
• Loosen and remove the screws in the brake
compartment cover.
5
Brake
Compartment
Cover
Hint: The location of the brake handle is adjustable for your
child’s comfort. To adjust, loosen the screw on the back of
the brake handle with the Allen wrench provided. Slide or
rotate the handle to the desired location and re-tighten the
screw with the Allen wrench.
Brake
Compartment
Lock Nut
Lock Nut
Brake
Adjustment
Knob
Metal Bracket