Filter
Top Products
4. Press the SEL button to scroll through the
phone list until the programmed or stored
name for the desired telephone number ap-
pears in the display.
5. Press and release the PTT BUTTON to
automatically dial the selected number.
6. When the called party answers, press the
PTT BUTTON to transmit and release it to
receive. Repeat as needed.
7. At the completion of the call, press the EXIT
button. The radio will then transmit the dis-
connect digit to hang-up.
Editing The Programmed Telephone Numbers
Or Storing A New Telephone Number
Any of the programmed or stored telephone num-
bers may be edited using the "PHN EDIT" menu. This
menu also allows new phone numbers to be stored
(added) to the list. Up to a maximum to ten (10)
different numbers can be programmed and/or stored
in the radio.
1. Press the MENU button until "PHN EDIT"
appears in the display.
2. Press the SEL button until the name for the
desired telephone number appears in the
display.
3. Enter the new number using the numeric
keypad. If a mistake is made, press the
MONITOR BUTTON to abort and then enter
the correct number.
4. After the correct number has been entered,
press EXIT to enter the new number and
return to normal operation.
"KEY LOCK" MENU (Scan and System models)
The "KEY LOCK" menu allows the keypad
(SCAN button and the twelve (12) numeric buttons)
to be locked or disabled to prevent accidental activa-
tion. If this menu is programmed into the radio, lock
and unlock the keypad as follows:
Lock The Keypad
1. If the "SCN" status flag is on, press SCAN
to turn scan off.
2. Press the MENU button until "KEY LOCK"
appears in the display.
24