Filter
Top Products
If programmed on, the power-up alert tone (beep) will
be heard.
MODE/CHANNEL/CG SELECTION
The M-PA Scan and System model radios may
be programmed with up to 192 different radio chan-
nels. A maximum of 12 modes of 16 channels each
or 16 modes of 12 channels each may be pro-
grammed into the radio (12 x 16 = 192). Select the
desired mode (bank of channels) and channel, or
channel and Channel Guard (CG), according to the
radio’s programming as follows:
MENU And SEL Selects Mode
CONTROL KNOB Selects Channel (And CG)
1. Press the MENU button until "MODE" ap-
pears in the display.
2. Press the SEL button to select the desired
mode. The selected mode’s name will ap-
pear in the display.
3. Press the EXIT button to switch radio opera-
tion to the selected mode and exit the menu.
4. Select the desired channel by rotating the
CONTROL KNOB until the desired chan-
nel’s name appears in the display.
CONTROL KNOB Selects Mode
MENU And SEL Selects Channel (And CG)
1. Select the correct mode by rotating the
CONTROL KNOB until the desired mode’s
name appears in the display.
2. Press the MENU button until "CHANNEL"
appears in the display.
3. Press the SEL button until the desired chan-
nel’s name appears in the display.
4. Press the EXIT button to switch radio opera-
tion to the displayed channel and exit the
menu.
MENU and SEL Selects Modes And Channels
CONTROL KNOB Selects Channel Guard
1. Press the MENU button until "MODE" ap-
pears in the display.
16