Filter
Top Products
After the menu is chosen, the desired function or
feature is selected by pressing the SEL button. For
example, to disable the alert tones, press MENU until
"ALERT" is displayed then press SEL to select "DIS-
ABLED". Next press the EXIT button.
EXIT BUTTON
Pressing the EXIT button will cause the radio to
exit the current menu display and return operation to
the channel currently selected. If the menu mode is
not enabled when the button is pressed, pressing this
button will turn the display and keypad backlighting
on for thirty (30) seconds if the backlight is pro-
grammed on.
SCAN BUTTON
Pressing the SCAN button on the keypad will
toggle scan operation on and off. When the radio is
scanning, the "SCN" status flag in the display will
show and all channels on the scan list will be
scanned. See SCANNING CHANNELS for addi-
tional details.
MENU BUTTON (System Model)
Pressing the MENU button causes the radio to
scroll through up to seven (7) different menus pro-
grammed into the radio. After the desired menu is
displayed, the feature within the menu is selected
with the SEL button. The menus that may be pro-
grammed are:
Menu Display Function Or Use
"CHANNEL" The MENU and SEL buttons are
programmed for channel selec-
tion. When this display appears,
select the desired channel with
the SEL button and then press
EXIT.
"MODE" The MENU and SEL buttons are
programmed for mode selection.
When this display appears, se-
lect the desired mode by press-
ing the SEL button and then
press EXIT.
"PHONE" Allows selection of one(1) of the
ten (10) programmed or user en-
tered telephone numbers for
automatic dialling.
10