Filter
Top Products
Page 12
MSP900SH
Installation, Operation & Maintenance Manual
IP2040/IM, Rev. AA
May 2007
6.0 Accessories
6.1 Submersion shield
The MSP-SUB2 is a tubular shield which slips over the black transmitter front housing.
This is usually fitted in wet well installations where the liquid level could rise faster than the pumps can pump out. As the liquid
covers the transmitter, an air-lock is created in the shield and the transmitter face remains free from contamination.
6.2 Head Verification Device
The MSP-HVD is a combined mounting bracket and verification device for use with the MSP900SH transmitter, normally used
in Open Channel Flow applications.
The HVD is mounted on an arm over the channel and supports the MSP900SH on an integral bracket. A target plate at a fixed
distance from the transmitter face may be swung under the transmitter. The level and flow readings calculated by the
transmitter in this situation may then be compared to a local calibration plate to ensure that the system is functioning correctly.
Refer to data sheet IP267 for further details.