15
MODEL 1056DP SECTION 6.0
PROFIBUS ACCESSORIES
SECTION 6.0
PROFIBUS ACCESSORIES
6.1 PROFIBUS NETWORK ACCESSORIES
6.2 MODEL 1056 PROFIBUS ACCESSORIES
6.3 SPARE PARTS TABLE
Accessories are available to support connection of Profibus devices to a Profibus network and Profibus master
unit.
6.1 PROFIBUS NETWORK ACCESSORIES.
Common Profibus network parts are available to assist with commissioning Profibus devices. The following parts
are available for purchase through Rosemount Analytical. Ordering part numbers and images of these parts are
included in this section.
• M12 T-connector
• M12 Terminating resistor
• M12 Bus cable, 2-position, 1 m
• M12 Bus cable, 2-position, 0.5 m
• M12 Bus plug connector, male, straight, 5-position, shielded
• M12 Bus plug connector, female, straight, 5- position, shielded
6.2 MODEL 1056 PROFIBUS ACCESSORIES
Rosemount Analytical offers an adaptor kit that allows connection of the Model 1056 Profibus instrument to a
Profibus network. This is an alternative to the conventional method of wiring a Profibus network cable directly to
the Profibus board installed in the Model 1056 Profibus instrument. The kit contents include:
a. M12 4-pin adaptor assembly including 4 soldered leads and a ground wire
b. M12 threaded adaptor nut for installing the M12 adaptor assembly into an enclosure opening of
the Model 1056 unit
c. o-ring for threaded adaptor nut to allow watertight sealing of the M12 adaptor assembly to the
enclosure of Model 1056 unit
d. instruction sheet for kit assembly and installation
Ordering information for the M12 adaptor assembly offered by Rosemount Analytical:
Part Number Description
24301-00 M12 adaptor assembly kit
Figure 6.1 M12 adaptor assembly kit