Filter
Top Products
Networking Basics
Connecting to a Wireless Network
Connecting to a Wireless Network with a Wireless Router or an
Access Point using a DHCP server in Windows 2000.
Select Obtain an IP address automatically.
Select Obtain DNS server address
automatically.
Click OK
Connecting to a Wireless Network with a Wireless Router or an
Access Point using a static IP address in Windows 2000.
Select Use the following IP address
Input a static IP Address within the same
IP Address range as the wireless router or
the access point.
IP address: 192.168.0.51
Subnet mask: 255.255.255.0
Default Gateway: 192.168.0.1
Select Use the following DNS server
address. Leave this section blank.
Click OK
Fig. 8.30
Fig 8.31
192 168 0 1
Fig 8.30