Filter
Top Products
Troubleshooting
4. Resetting the DWL-900AP+ to Factory Default Settings
After you have tried other methods for troubleshooting your network, you
may choose to Reset the DWL-900AP+ to the factory default settings.
Remember that D-Link AirPlus products network together, out of the box,
at the factory default settings.
To hard-reset the D-Link AirPlus DWL-900AP+ to Factory Default Settings,
please do the following:
Locate the Reset button on the back of the DWL-900AP+
Use a paper clip to press the Reset button.
Hold for about 5 seconds and then release
After the DWL-900AP+ reboots (this may take a few minutes) it will
be reset to the factory Default settings.