Filter
Top Products
16
Using the Configuration Menu
Wireless Client: Will
transform any IEEE 802.3
Ethernet device into an
802.11b wireless client as
long you are connecting to a
DWL-900AP+ acting as an
Access Point. The Site
Survey function will allow you
to scan for available wireless
networks.
Wireless Bridge: This mode will
allow you to connect two wireless
LANs together. The wireless
bridge will only work with another
DWL-900AP+.
Advanced > Mode > Site Survey
Note! If you use the DWL-900AP+
in Wireless Bridge Mode, make sure
that you enter the Wireless MAC
Address of the remote DWL900AP+
unit that you want to establish a
wireless connection.
Multi-point Bridge: This mode will allow you to connect multiple wireless LANs
together. Other wireless LANs must be using DWL-900AP+s.