Filter
Top Products
HYDROBLOC LS SERIES
SPECIFICATIONS
¹ Based on 100°F inlet air temperature and -40°F pressure dew point. Maxi-
mum recommended inlet temperature, 120°F. For capacity at inlet tem-
perature higher than 100°F, consult your local distributor.
DETAIL SPECIFICATIONS:
Dryer Cycle: NEMA Cycle 6 minutes
Drying 3 minutes
Regeneration 3 minutes
Dryer Adsorbent: Type DE-4 Activated Alumina
Pressure Vessels: ASME Section VIII, DIV. 1 Stamped
Design Pressure 175 psig (minimum)
Design Temperature 450° F
Dryer: Operation Automatic
Pressure Drop .5 TO 5 psid @ 100 psig and 100° F
Purge Source Dryer Outlet
UTILITIES:
Electrical: NEMA Type NEMA 4X
Input 115V, 60 HZ, 1 PH
Power Consumption 40 WATTS
STANDARD DESIGN OPERATING CONDITIONS
Operating Pressure 60 psig minimum
150 psig maximum
Operating Temperature 40° F minimum
120° F maximum
Inlet Moisture Content Saturated (at specified inlet pressure)
Outlet Moisture Content -40 °F Dew Point @ line pressure
MODEL FLOW CAPACITY¹
(scfm)
LS60 60
LS110 110
LS130 130
LS185 185
LS240 240
LS270 270
LS360 360
LS505 505
LS630 630
LS760 760
LS1000 1000
LS1250 1250
LS1500 1500
LS2070 2070
LS2580 2580