Filter
Top Products
49
Curtis enAble
®
40-Series Manual, Rev. B
Table 1: HANDCONTROL INDICATORS, cont’d
HANDCONTROL LCD DISPLAY FAULT/WARNING REMEDY
Undervoltage Warning 1. Recharge battery.
2. Replace old battery.
3. If this is happening frequently, replace charger.
4. Check charger port on handcontrol; replace if
damaged.
Overvoltage Warning. 1. Wait for voltage to come down.
2. Replace old battery.
3. Check charger; replace if faulty.
Controller Over/Undertemperature 1. If too hot, wait for controller to cool.
Warning. 2. If too cold, drive chair in limited current mode
until controller warms up.
Drive Thermal Warning. 1. Wait for motor to cool.
Open Motor Fault. 1. Check wiring.
2. Replace motor.
3. Replace powerbase.
Left Indicator Fault. 1. Press Left Indicator button.
2. Replace bulb.
3. If fault continues, check wiring.
Right Indicator Fault. 1. Press Right Indicator button.
2. Replace bulb.
3. If fault continues, check wiring.
Hazard Lights Fault. 1. Press Right or Left Indicator button.
2. Replace bulb.
3. If fault continues, check wiring.
Running Lights Fault. 1. Press Running Lights button.
2. Replace bulb.
3. If fault continues, check wiring.
Speed Limit Warning. 1. Return seat to normal or upright position.
2. If fault continues, check all limit switches
and wiring.
The numerical icon showing the
present Speed Mode flashes.
!
+
!
+
+
8 — DIAGNOSTICS & TROUBLESHOOTING
+
+
+
+
+
+
!
+