Filter
Top Products
iv
Curtis enAble
®
40-Series Manual, Rev. B
CONTENTS
Sound & Display Parameters ............................................27
Reverse, Command, and Error Beep; Backlight Day/Night
Handcontrol Inhibit Parameters ........................................27
Halt Actuator 1 Dir-/+; Halt Actuator 2 Dir-/+
Seat Parameters .................................................................28
Toggle Control Mode; Simultaneous Mode/Speed;
Actuator 1/2 Function, Speed, Stop Current;
Actuator Stop Time; Actuator Open Detect
Lights Parameters ..............................................................29
Running Lights, Running Light Volts, Min Light Current;
Indicators, Indicator Volts, Min Indicator Current;
Indicator Timeout
Current Limits Parameters ................................................29
Peak, Drive, and Brake Current Limit; Peak Current Time
Multi-Function Input 1 Parameters ..................................30
Off/InbL/InbH/Spd; Charger Inhibit; Halt Act 1 Dir-/+;
Halt Act 2 Dir-/+; Speed Limit Low/High
Multi-Function Input 2 Parameters ..................................31
Off/Seat; Active Low; Charger Inhibit;
Halt Act 1 Dir-/+; Halt Act 2 Dir-/+; Speed Limit
Multi-Function Input 3 Parameters ..................................32
Off/Swvl/Spd; Active Low; Charger Inhibit;
Halt Act 1 Dir-/+; Halt Act 2 Dir-/+; Speed Limit
Compensation Parameters .................................................33
High Speed, Low Speed, Anti-Rollback, Extra Uphill,
Max Downhill, and Extra Motor Comp; Uphill Threshold;
Downhill Gain and Threshold; Preload Rate;
Max Motor Voltage; Volts Headroom
Motors & Brakes Parameters ..............................................34
Auto-Trim; Motor Trim; System Resistance; Hot System
Resistance; Motor Current Rating; Time at Max Current;
Motor Cutback Gain; Gear Soften; Single Brake Drive;
Brake Turn-On and Cutback Voltage; Brake Delay;
Motor Swap; Motor Test Mode
Battery Parameters .............................................................35
Partial Charge Min; Full, Empty, Reset, and Start Charge
Voltage; Discharge Factor; Charge Factor
6. MONITOR MENU ................................................................36
7. TUNING GUIDE ...................................................................
38
8. DIAGNOSTICS & TROUBLESHOOTING .........................
47
9. MAINTENANCE ...................................................................
52
APPENDIX A Guidelines for BDI Setup
APPENDIX B 1311 Programmer Operation
APPENDIX C Mating Connectors & Replacement Parts
APPENDIX D Specifications: 40-Series System