Filter
Top Products
- Eng 16 -
Deutsch
English
Español Português Italiano
Français
- Eng 17 -
English
EspañolPortuguêsDeutsch
Français
Italiano
MEASURING YOUR BLOOD PRESSURE
4 Pull the end of the cuff
outwards so that the cuff is
snug around your arm and
then secure the end to the
hook-and-loop fastener.
5 Place your arm on a table or the
like, so that the center of the cuff
comes to the height of your heart.
* Carefully place the cuff on your
arm, taking care to use the
correct tightness. The tightness
is correct if you can readily slide
a fi nger between the cuff and
your arm.
6 Relax your arm and lightly open
your hand, with the palm upward.
MEASURING YOUR BLOOD PRESSURE
• Plug the air hose connector fi rmly
into the air hose socket on the
main unit, as illustrated.
Plug the air hose
connector into the main
unit.
Place the cuff at the height of the heart.
( See page 20)
2
3
Air hose socketAir hose connector
Press the START/STOP switch (the blue switch).
4
* If the pressurization value exceeds 280mmHg, if pressurization feels
abnormal, or if you want to stop the measurement process, press the
START/STOP switch again. The cuff defl ates, and the power turns off.
• All digits displayed is an initial display, indicating that the monitor is
functioning normal.
• The cuff is pressurized automatically.
* If the unit judges that pressurization is insuffi cient, it automatically
repressurizes.
* is displayed when a pulse is detected.
* When you want to stop measurement, press the
“START/STOP” switch. The cuff is defl ated and
measurement stops.