Filter
Top Products
- Eng 26 -
Deutsch
English
Español Português Italiano
Français
- Eng 27 -
English
EspañolPortuguêsDeutsch
Français
Italiano
Make sure to check the following before sending your blood pressure monitor away
to be tested or repaired.
Problem Checks Response
Display stays blank when
you press the “START/
STOP” switch.
Check whether the
batteries are dead.
Replace all the batteries
with new ones.
Check whether the
batteries are installed the
right way round (
and
oriented correctly).
Load the batteries in the
correct direction.
No measurements can
be taken.
Check whether the
measurement icon is
displayed.
Attach the cuff properly.
Check whether the cuff is
attached correctly.
Did you stay calm during
measurement?
Measure your blood
pressure again, making
sure to remain still.
Note that blood pressure measurement may not be
possible for someone with an extremely weak pulse
or cardiac arrhythmia (irregular pulse).
Your blood pressure readings are abnormally high or
low compared with those taken in hospital.
See page 25.
Other phenomena
Remove the batteries from
the unit and change them
with new ones.
BEFORE REQUESTING REPAIRS OR TESTING
SPECIFICATIONS
Model Number: CH-456
Measurement system: Oscillometric method
Measurement Localization Upper Arm
Cuff: Soft cuff
Cuff circumference range: 22.0 – 32.0 cm
Measurement range:
Pressure 0 to 280 mmHg
Pulse 40 to 180 pulse/min
Accuracy:
Pressure ±3 mmHg
Pulse ±5% of reading
LCD displays:
Pressure 3 digits
Pulse 3 digits
Icons
: Measurement icon
: Battery icon
: Irregular Heartbeat (IHB) Indicator
: Body Movement Indicator
: Memory icon
: Average indicator
Switch:
4 (
, ,
START/STOP, MEMORY)
Infl ation: Automatic Infl ation by internal pump
Defl ation: Automatic speed defl ation system.
Rated voltage: 6V DC
3W ( : direct current)
Exhaust: Electromagnetic quick exhaust valve
Power supply: 4 AA batteries (R6P, LR6)
Battery duration:
Alkaline Approx. 500 times
(170 mmHg, once/day,
23°C, Use Cuff)
Manganese Approx. 150 times
Automatic Power Off function: Approx. 3 min. (after activated)
Main Unit Dimensions: 105 (W) X 166 (H) X 122 (D) mm
Cuff Size: Approx. 144 x 492 mm
Weight:
Unit: Approx. 390g w/o batteries
Cuff: Approx. 130g
Operating conditions:
Temperature 10°C – 40°C
Humidity 30% to 85% RH
Storage conditions:
Temperature -20°C – 60°C
Humidity 10% to 95%RH
Electric shock protection: Internal power unit
Degree of Protection
Type BF applied part
Mode of operation: Continuous operation
Memory: 90 readings, Average of last 3 readings
Service Life: 5 years
Cuff’s Life: Approx. 2000 times
Accessories:
Set includes an cuff, 4 AA batteries (R6P) for the
monitor, Instruction Manual
Optional Accessories: Large Cuff 32.0 – 42.0 cm, AC Adapter
* Applied part for this device is Cuff.
* A range in barometoric pressure 105 kPa to 70 kPa
* A range in altitude -300 m to 3000 m
*
Overall system accuracy of this device is met with the requirement of item 7.9 of EN1060-3.
EN1060-3 : Non-invasive sphygmomanometers Part 3 (European Standard)
* If you want to dispose this product, do not mix with general household waste. There is a
separate collection systems for used electronics products in accordance with legislation.