Filter
Top Products
- Eng 10 -
Deutsch
English
Español Português Italiano
Français
- Eng 11 -
English
EspañolPortuguêsDeutsch
Français
Italiano
LOADING THE BATTERIES
REMOVING THE BATTERIES
• When the icon is displayed or nothing appears in the display, replace the old
batteries with four new ones. All four batteries should be changed at once.
: The remaining capacity of the batteries is inadequate.
• Adjust the clock after changing the batteries.
• The data stored in the memory is not deleted by changing the batteries.
• Do not use rechargeable batteries.
• Do not use alkaline (LR6) and manganese (R6P) batteries together.
• Batteries included are for demonstration purposes only. Battery life may be
shorter than specifi ed.
• When disposing of used batteries, comply with governmental regulations or
environmental public institution’s rules that apply in your country/area.
3 Close the battery cover.
Fitting the lugs of the cover at the mating recesses of the battery compartment body,
push the hook to close the cover.
Fit the lugs (projections)
at the recesses.
(Batteries supplied with the unit should be loaded in compartment before you use
the blood pressure monitor.)
LOADING THE BATTERIES
1 Open the cover of battery compartment.
Pressing the hook down, pull the cover toward you to open.
2 Place batteries in the compartment.
Put the batteries paying attention to the positive and negative terminal symbols
and .
Battery cover
Lug (projecting section)
Battery
compartment
4 “AA” batteries
* If the Blood pressure monitor is left unused
for an extended period of time, the batteries
should be removed from the compartment.
Hook
* When you install the batteries for the fi rst time after purchase, the monitor will
display the clock setting screen. Follow step 2 and subsequent steps in TIME
ADJUSTMENT (
See page 13) to set the clock.