Filter
Top Products
- Eng 20 -
Deutsch
English
Español Português Italiano
Français
- Eng 21 -
English
EspañolPortuguêsDeutsch
Français
Italiano
TIPS FOR OBTAINING ACCURATE MEASUREMENTS
Your blood pressure varies according to your posture, the time of day and a range of
other factors. Ideally, you should measure your blood pressure in the same posture
at the same time every day.
■ Taking measurements while sitting
1 Place your arm on a table or
similar surface with your forearm
extended.
2 It is important to have the cuff
level with your heart.
3 Open your hand slightly on the
table so that your palm is facing
up and your fi ngers are relaxed.
4 Do not move your body or talk
while taking the measurement.
■ Measurement in a reclining posture
1 Lie down, facing the celling.
2 Lightly open your hand with palm up and straighten your arm.
3 Relax your body, arm and fi ngers.
4 Do not move your body or talk during measurement.
* Relax yourself
to avoid placing
pressure on the cuff.
■ You may use your right arm to measure your blood pressure.
Blood pressure value is likely to differ by as much as 10mmHg when measured on
the right arm instead of the left (or vice-versa). Measure your blood pressure on the
same arm each day.
CALLING UP THE DATA STORED IN MEMORY
90 measurement results can be stored in Memory.
The average value is calculated automatically to help you manage your daily health.
1 Press the Memory switch once.
Memory switch
* Example of display when the Memory switch is pressed.
indicating the average value appears at the bottom of the display. Then the
average value, based on the last three measurements, is displayed.
* ( and the average value do not appear if there are two or fewer measurements
stored in memory.)